Hereโ€™s a few of the potential pitfalls to watch out for when swapping power supplies between Sega Saturn revisions. In this video Iโ€™m fitting a compatible 240 V PSU to a Japanese โ€œThis is COOLโ€ Skeleton Saturn so I can use it directly from Australian mains. That is a power-supply swap, not a modification that magically turns any 100 V Saturn PSU into a 240 V one, and the replacement still has to match the consoleโ€™s motherboard revision and required output rails.

My Skeleton Saturn used the shorter Type C power supply, while the PAL Saturns I had available were fitted with Type B boards. Those werenโ€™t suitable replacements for this particular machine, so I asked around on ASSEMblergames.com and somebody kindly came to the rescue with a compatible Type C supply. The mains connector was also keyed differently, something else I needed to account for. The number of pins alone isnโ€™t enough to establish that two Saturn power supplies are interchangeable.

Good thing I did this too, because the other day I pulled it out and without thinking connected it to powerโ€ฆ I guess it was more for the Saturnโ€™s safety than mine! This is mains-powered hardware, so an open Saturn is not the place for casual live testing.

For the earlier revision notes, see Sega Saturn Power Supply Swapping.

Sources