Sony PlayStation | Mayumi 4 | SCPH-7502 | PU-22

cats
There are eight points to solder in total.
Above is the pinout, from pin 1 through to pin 8.
Above is the pinout, from pin 1 through to pin 8.

The Mayumi 4 modchip supports three different modes on the SCPH-750x model / PU-22 board. To change modes, press and hold reset for two seconds.

Strongest mode –> Old modchip mode –> Disable mode

WDT_OFF, ExtRC_OSC, MCLR_OFF

Back to the modchip installation guide list

Creative Commons License Netscape Internet Explorer ICQ Powered by Debian! Tor - Anonymity Online mIRC for all! Do Only Good Everyday!

Established February 2012 and was last updated 6th of April 2024. You are visitor number Counter since sometime in the mid-1990s. We are powered by a Raspberry Pi.
:BIGGAYROLL: