Sega TeraDrive XTIDE DoM Troubles

So many types of disk on modules, so little time. Found this while searching.

Some CF cards and microdrives do not work properly with IBM 5150/5160 when using XTIDE rev 1 or rev 2. Some of the symptoms are improperly displayed drive name on boot menu or the drive appears to work on some occasions and sometimes not. This is a hardware related problem and cannot be fixed by software.

So far I’ve gone through three types / brands of disk on modules. I was after one that was powered on pin 20 for 5V and preferably 2GB in size since FAT16 likes 2GB sized partitions. It’s plenty of room for a 286-class machine as well.

Transcend 4GB
5V on Pin 20: YES
Recognised with XTIDE: NO

KingSpec 2GB
5V on Pin 20: NO
Recognised with XTIDE: YES

TopSSD 4GB
5V on Pin 20: YES
Recognised with XTIDE: YES

Unfortunately, I can’t track down these TopSSD drives anywhere. I was hoping the Transcend ones world work best, but they didn’t. They had voltage, but weren’t recognised correctly with the XTIDE software. Limitations or issues with the Transcends sure is harsh. But at least I have now seen all three possible scenarios these DoMs provide.

Leave a Reply